Codex Arriraw Manual de usuario Pagina 5

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 6
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 4
CODEX ONBOARD RECORDER RECORDING ARRIRAW 2160p Rev10.01.2012 PAGE 4
If you do not require that ARRIRAW timecode matches SxS recordings, then feel free to choose any TC
sourceor AUX source”.
When shooting Variframe from Alexa the Onboard is able to record timecode which can be matched back to
the SxS ProRes media, but only if Fix TC Breaksis set to No. When using a Codex Transfer Station/Digital
Lab to deliver files from the VFS this must be set up so the TC Ratematches the project timecode rate in
order that the timecode of deliverables is correct to conform to the SxS ProRes files used in the edit.
TC source: HD VANC
AUX source: HD VANC UB
Metadata: None or ARRI [to capture dynamic metadata such as lens data, which is inserted into ARI file
headers]
Fix TC break: No
Video delay: None
TC delay: None
Menu: SETUP->AUDIO (AUDIO SETUP”)
Configure the audio settings to your projects' requirements. The Onboard recorder supports:
Up to 8 channels of embedded digital audio (HD AiV)
Up to 4 channels of AES digital audio
Up to 2 channels of analog line-level audio
Input: AES, HD AiV, Line
Channels: None, 1, 2, 4, 6, 8 [Number of channels. Set to Noneif no audio is required]
Input Level: [22, 18, 15, 12, 8] dBu [Only applicable to analog sources]
AES SRC: On, Off [Only applicable to AES sources, and should be Onif the audio feed is not genlocked to
the video]
Bits: 24
If no audio is to be recorded to the Onboard recorder then the user should disable audio capture by setting
Channelsto None. None of the other items in the AUDIO menu have any effect when audio is disabled.
4.4 During a shoot: Playback settings
When on the TRANSPORT screen (for E-E, PLAYback or REC), the Optionsbutton is available on the left-
most button under the screen.
Menu: TRANSPORT->Options (TRANSPORT OPTIONS”)
The following are sensible defaults:
LUT: <off>
Volume: 15
Play loop: Repeat
Play range: All
Play rate: Default, 23.98, 24.00, 25.00, 29.97, 30.00, 47.95, 48.00, 50.00, 59.97, 60.00
Play chans: All
TC source: TC
TC type: Standard
Note: It is possible to force a particular playback rate. It is typical to set this to 23.98 or 24.00 for most film
productions, so that off-speed / varispeed clips are always played back at the intended projection rate.
Vista de pagina 4
1 2 3 4 5 6

Comentarios a estos manuales

Sin comentarios